TEL: +86-595-82050111
Categories
Contact Us
TEL: +86-18859777755
FAX: +86-595-82006151
E-mail: hicreate@jubao.cc
ADD: Hi-Create Factory, Xidong Industrial Zone, Luoyang, Huian, Quanzhou, Fujian, China

Mobile 2D code:
Baby Diaper Machine Making

Baby Diaper Machine Making

The machine can produce regular type,economic type and high grade type baby diapers...

Main technician parameters:

1.1) Source: 380V, 50HZ.

1.2) Air compressor: 1200L/MIN, 6-8BARs

1.3)Product exterior: cotton core long strip, I type of externality, solid besiege, elasticity cummerbund.

1.4) Production specification: by the client

1.5)Structure of the product: surface layer ,leg cuff, cotton core, tissue paper, acquisition, SAP, waist elastic, wet strength paper, lyre, waist tape, frontal waist tape, back sheet.

1.6) Power: 120KW (exclude glue applicators)

1.7) Design speed: 400pcs/min

1.8) Stable speed: 350pcs/min

1.9) Ratio of conformity: ≥97% (waste caused by glue applicator, raw material and auto splicing exclude).

1.10) Machine direction: left turn to right when you face to the machine.

1.11) Machine color: by the client.

Host machine configurations


1. Unwinding system: Part of material unwinding by driving, constant tension controlling and full speed auto changing and connecting raw materials


1.1) Wood pulp unwinding

      Wood pulp shelf can hold maximal diameter 1400 withed roll material

1.2) Up-interleaving paper auto unwinding

      Tension control system one set ( auto exchanging material one set, inflatable shaft two sets, coil frequency conversion motor two sets)

1.3) Under-interleaving paper auto unwinding

      Tension control system one set ( auto exchanging material one set, inflatable shaft two sets, coil frequency conversion motor two sets)

1.4) Conductivity water layer non-woven fabrics auto unwinding

      Tension control system one set ( auto exchanging material one set, inflatable shaft two sets, coil frequency conversion motor two sets)

1.5) Water repellent non-woven fabrics auto unwinding

      Tension control system one set ( auto exchanging material one set, inflatable shaft two sets, coil frequency conversion motor two sets)

1.6) Surface non-woven fabrics

      Tension control system one set ( auto exchanging material one set, inflatable shaft two sets, coil frequency conversion motor two sets)

1.7) Elastic waist auto unwinding

      Tension control system one set ( auto exchanging material one set, inflatable shaft two sets, coil frequency conversion motor two sets)

1.8) Lycra frequency auto surface unwinding

1.9) Basement membrane auto unwinding

      Tension control system one set ( auto exchanging material one set, inflatable shaft two sets, coil frequency conversion motor two sets)

1.10) Temperature paper auto unwinding

       Tension control system one set ( auto exchanging material one set, inflatable shaft two sets, coil frequency conversion motor two sets)

1.11) First course side waist tape passive unwinding

      Tension control system one set ( auto exchanging material one set, inflatable shaft two sets, coil frequency conversion motor two sets)

1.12) second course side waist tape passive unwinding

      Two material shaft, mechanical manual exchanging material one set,(it need to reduce the speed)

1.13) Frontal waist tape passive unwinding

Two material shaft, mechanical manual exchanging material one set,(it need to reduce the speed)

 

2. Pulverization and Shaping

1.  Saws of Pulverizer use alloy material, the pulverizer can crash oar. Loading of wood pulp is used cylinder lifting device. Wood pulp feed is used variable speed case to adjust. 

2.  Cotton corn of absorber’s demoulding, adsorption, and transfer by net-mould, shaping of tissue paper use upper and lower package. 

3.  Quantitative polymer twin-screw, layered mixed exert negative pressure suction.

 

3. Knife mold

1. Compaction device of absorber

2. Pressure grid device of absorber

3. Cut off device (interior contact) of absorber

4. Cut off device of water guider non-woven fabrics

5. Straddle cut device of water repellent non-woven fabrics

6. Slice cut device of surface non-woven fabrics 

7. Pull-up device of elasticity waist

8. Tangent arc device

9. Cut off device of side waist tape

10. Flatting device of frontal waist tape

11. Final cut device 

12. Non-stop machine adjust phase, straddle cut device adopt blow cut way.

 

4. Wall Rack and Transmission

1. Boards, panels are used 20mm steel plate, the base frame with 120×120 square tubes.

2. Machine use the main electric transmission and coupling, rectangular boxes, synchronous, differential box multi-axis mechanical drive link.

3. The driving adopt rear axle box joint cage to make the transmission stably.

4. The drive adopts universal couplings to connect Cage, to ensure more stable on the high speed operation.

5. Differential and gear box joint make transmission energy-efficiently

6. Finished use array output mechanism.

 

5. Air trunk 

Air trunk making use circular tube, branch of air pipe is furnished with adjustment valve, which connect by PVC tube. 

Sucking pump and centrifugal fan adopt China brand, host air pipe be furnished with reducing valve and water oil separator.

 

6. Electric appliance

Host frequency control of motor speed drive.

PLC program control, touch screen operation, graphical control.

Raw material off will be auto-detection alarm.

Heated mold auto control temperature, temperature meter display real-time temperature.

SAP low alarm

Non-stop machine adjust phase. 

Operation screen will real-time display: product amounts, qualified amount, speed, error station.

Machine installs many bell button and lift

Operation side and transmission side are equipped with a “lifeline”

With the melt glue machine, it can be auto adhesive and auto-tracking.

Baby diaper machine making

Hot Tags: baby diaper machine making, China, manufacturers, suppliers, factory, turnkey factory, price list, quotation, cheap, customized
Related Products
  • Contact Us
    TEL: +86-18859777755
    FAX: +86-595-82006151
    E-mail: hicreate@jubao.cc
    ADD: Hi-Create Factory, Xidong Industrial Zone, Luoyang, Huian, Quanzhou, Fujian, China

    Mobile 2D code:
  • Categories
  • Copyright © Quanzhou Hi-Create Machine Co.,Ltd All Rights Reserved.